#2002 6-Lobe (TX) Stem Punch Inserts
#2002 6-Lobe (TX) Stem Punch Inserts
Precision carbide stem punch inserts for external 6-lobe fastener tooling applications, engineered for concentricity, repeatability, and dependable production performance.
This series is designed for manufacturers requiring stable external 6-lobe forming geometry with high wear resistance and tight dimensional control. Standard configurations are shown below, with additional sizes available to your specifications.
Standard Sizes
The following standard part numbers are listed in the catalog for the #2002 series. Dimensions are shown in both inch and millimeter format for production reference and quotation convenience.
| Part Number | Reference Number | Drive Size | A inch / mm |
B inch / mm |
D inch / mm |
L inch / mm |
X inch / mm |
|---|---|---|---|---|---|---|---|
| 2002-01-230 | 1-TME-230 | E1 | .090 / 2,29 | .063 / 1,61 | .500 / 12,70 | .50 / 12,7 | .125 / 3,19 |
| 2002-01-231 | 1-TME-231 | E1 | .090 / 2,29 | .063 / 1,61 | .500 / 12,70 | .50 / 12,7 | .140 / 3,58 |
| 2002-02-230 | 2-TME-230 | E2 | .118 / 3,01 | .083 / 2,12 | .500 / 12,70 | .50 / 12,7 | .160 / 4,08 |
| 2002-04-230 | 4-TME-230 | E4 | .146 / 3,72 | .103 / 3,62 | .500 / 12,70 | .50 / 12,7 | .180 / 4,58 |
| 2002-05-230 | 5-TME-230 | E5 | .181 / 4,61 | .127 / 3,23 | .625 / 15,87 | .50 / 12,7 | .212 / 5,39 |
| 2002-05-231 | 5-TME-231 | E5 | .181 / 4,61 | .127 / 3,23 | .750 / 19,05 | .75 / 19,0 | .251 / 6.39 |
| 2002-06-230 | 6-TME-230 | E6 | .226 / 5,57 | .151 / 3,84 | .750 / 19,05 | .75 / 19,0 | .283 / 7,21 |
| 2002-07-230 | 7-TME-230 | E7 | .237 / 6,03 | .166 / 4,22 | .750 / 19,05 | .75 / 19,0 | .355 / 9,04 |
| 2002-08-230 | 8-TME-230 | E8 | .288 / 7,32 | .201 / 5,11 | .750 / 19,05 | .75 / 19,0 | .434 / 11,03 |
| 2002-11-230 | 11-TME-230 | E11 | .389 / 9,89 | .265 / 6,74 | 1.000 / 25,40 | 1.00 / 25,4 | .434 / 11,03 |
| 2002-12-230 | 12-TME-230 | E12 | .432 / 10,98 | .304 / 7,73 | 1.250 / 31,75 | 1.25 / 31,7 | .505 / 12,85 |
| 2002-14-230 | 14-TME-230 | E14 | .500 / 12,71 | .355 / 9,02 | 1.250 / 31,75 | 1.00 / 25,4 | .584 / 14,85 |
| 2002-16-230 | 16-TME-230 | E16 | .572 / 14,54 | .405 / 10,29 | 1.250 / 31,75 | 1.50 / 38,1 | .742 / 18,85 |
| 2002-20-230 | 20-TME-230 | E20 | .715 / 18,18 | .518 / 13,01 | 1.500 / 38,10 | 1.50 / 38,1 | .885 / 22,49 |
Manufactured in 20% carbide for improved wear resistance and stable performance in demanding fastener tooling applications.
Catalog tolerance calls for I.D.’s concentric within .0005″ / 0,002 mm to support accurate forming and repeatable production results.
Additional sizes are available to your specifications for application-specific tooling requirements, production setups, and fastener geometries.
Request a Quote or Application Review
Need help selecting the correct 6-lobe external punch tooling configuration? Contact Universal Punch Corp. for quotation support, engineering review, and custom production options for your application.