Universal Punch Series #1112 · TMP-34
6-Lobe (TX) Hex Washer Punch Pin
Universal Punch #1112 6-Lobe (TX) Hex Washer Punch Pins are cataloged as TMP-34 tooling in M-2 high-speed steel, with eight published configurations covering drive sizes 10 through 45.
Direct Product Definition
What is the #1112 6-Lobe (TX) Hex Washer Punch Pin?
The Universal Punch catalog identifies #1112 as the 6-Lobe (TX) Hex Washer Punch Pin, catalog reference TMP-34. The dedicated sheet publishes eight configurations with dimensions D, G, H, K and L in both inch and metric values.
The family is organized by 6-Lobe drive size. Published drive sizes are 10, 15, 20, 25, 27, 30, 40 and 45. The published material is M-2 High Speed Steel at RC 62–64, with coatings available upon request.
Published Technical Data
#1112 TMP-34 technical specifications.
Key catalog values are presented as searchable HTML so engineers, buyers and search systems can read the specifications directly. The configuration table below remains the primary dimensional reference for selection.
- Series
- #1112
- Product
- 6-Lobe (TX) Hex Washer Punch Pin
- Catalog reference
- TMP-34
- Drive sizes
- 10, 15, 20, 25, 27, 30, 40, 45
- Material
- M-2 High Speed Steel
- Hardness
- RC 62–64
- Coatings
- Available upon request
- Configurations
- 8 published configurations
Published D, G, H, K and L dimensions
Digital Catalog Selector
Search all 8 published #1112 configurations.
Search by part number, drive size or any D/G/H/K/L dimension. You can also filter by drive and published K/L dimensional group.
8 catalog configurations shown
| Part number | Drive | D inch / mm | G inch / mm | H inch / mm | K inch / mm | L inch / mm |
|---|---|---|---|---|---|---|
| 1112-10 | 10 | .307″ / 7.80 mm | .045″ / 1.14 mm | .179″ / 4.55 mm | .687″ / 17.44 mm | 1.227″ / 31.16 mm |
| 1112-15 | 15 | .307″ / 7.80 mm | .050″ / 1.27 mm | .242″ / 6.15 mm | .687″ / 17.44 mm | 1.227″ / 31.16 mm |
| 1112-20 | 20 | .307″ / 7.80 mm | .065″ / 1.65 mm | .242″ / 6.15 mm | .687″ / 17.44 mm | 1.227″ / 31.16 mm |
| 1112-25 | 25 | .372″ / 9.45 mm | .070″ / 1.78 mm | .302″ / 7.67 mm | .687″ / 17.44 mm | 1.227″ / 31.16 mm |
| 1112-27 | 27 | .371″ / 9.45 mm | .080″ / 2.03 mm | .302″ / 7.67 mm | .687″ / 17.44 mm | 1.227″ / 31.16 mm |
| 1112-30 | 30 | .494″ / 12.54 mm | .095″ / 2.41 mm | .364″ / 9.25 mm | 1.250″ / 31.75 mm | 1.559″ / 39.60 mm |
| 1112-40 | 40 | .619″ / 15.72 mm | .115″ / 2.92 mm | .487″ / 12.37 mm | 1.250″ / 31.75 mm | 1.559″ / 39.60 mm |
| 1112-45 | 45 | .619″ / 15.72 mm | .140″ / 3.55 mm | .548″ / 13.92 mm | 1.250″ / 31.75 mm | 1.559″ / 39.60 mm |
Send the existing part number, tooling drawing, drive requirement or sample information for review.
Material & Construction
M-2 high-speed steel, RC 62–64.
The #1112 catalog sheet specifies M-2 High Speed Steel and RC 62–64 hardness. Coatings are available upon request and should be identified with the quotation requirements.
Selecting a Configuration
Specify the correct #1112 punch pin.
Start with the required 6-Lobe drive size, confirm the published TMP-34 dimensions, and reference the exact #1112 part number when requesting a quote.
Select drive size
Choose from the eight published drive sizes: 10, 15, 20, 25, 27, 30, 40 or 45.
Verify dimensions
Confirm the D, G, H, K and L dimensions shown for the required configuration.
Reference the part number
Include the complete #1112 part number, quantity, print and any coating requirements with the RFQ.
Ordering #1112
What to provide for a #1112 quotation.
Providing the information below helps Universal Punch identify the intended TMP-34 configuration efficiently and confirm current quotation requirements.
Identify the part number
If known, provide the exact #1112 catalog part number from the selector above.
Confirm drive size
Specify the required 6-Lobe drive size from the published 10–45 catalog range.
Verify dimensions
Use D, G, H, K and L when dimensional confirmation is needed for the existing tooling setup.
Send the tooling print
Provide the customer drawing or existing tool information when available for application review.
State quantity and timing
Include required quantity and requested delivery timing for current availability and quotation.
Confirm coating and documentation
Identify coating, inspection, certification or customer-specific documentation requirements.
- #1112 part number, if known
- Drive size
- Required quantity
- D / G / H / K / L dimensions if relevant
- Customer tooling drawing
- Coating requirement
- Inspection requirements
- Requested delivery timing
#1112 Technical FAQ
Frequently asked questions.
What is the Universal Punch #1112 6-Lobe (TX) Hex Washer Punch Pin?
The #1112 is the Universal Punch 6-Lobe (TX) Hex Washer Punch Pin identified by catalog reference TMP-34. The dedicated catalog sheet publishes eight configurations across drive sizes 10 through 45.
What catalog reference is used for the #1112 punch pin?
The #1112 6-Lobe (TX) Hex Washer Punch Pin is identified in the Universal Punch catalog as TMP-34.
What material and hardness are specified for #1112?
The #1112 catalog sheet specifies M-2 High Speed Steel at RC 62–64.
What drive sizes are available for #1112?
The published #1112 drive sizes are 10, 15, 20, 25, 27, 30, 40 and 45.
What dimensions are published for #1112?
The TMP-34 catalog drawing and table publish D, G, H, K and L dimensions in inch and metric values for each configuration.
Why do #1112-10 through #1112-27 and #1112-30 through #1112-45 have different K and L dimensions?
The catalog groups drive sizes 10, 15, 20, 25 and 27 at K .687 inch / 17.44 mm and L 1.227 inch / 31.16 mm, while drive sizes 30, 40 and 45 use K 1.250 inch / 31.75 mm and L 1.559 inch / 39.60 mm.
Are coatings available for #1112?
Yes. The Universal Punch catalog states that coatings are available upon request.
What information should I send for a #1112 quote?
Provide the #1112 part number if known, drive size, quantity, customer drawing or tooling requirement, coating needs and any inspection or documentation requirements.
Need the correct #1112 hex washer punch pin?
Send Universal Punch the part number if known, drive size, quantity and tooling drawing. Our team can review the TMP-34 configuration and confirm current quotation requirements.