6-Lobe (TX)
Indented Hex
Pin Holder
Universal Punch Series #1107 is the cataloged 6-Lobe (TX) Indented Hex Pin Holder for TMP-34 applications. Eight published configurations cover drive sizes 10 through 45, with each holder matched to a corresponding Series #1100 6-Lobe punch.
Series #1107 Indented Hex Pin Holder
Series #1107 is designed as a cataloged holder system with specific drive sizes, screw sizes, published holder dimensions and matching #1100 punch references.
#1107 TMP-34 Specifications
The catalog identifies the product, construction, available range and selection dimensions required to specify the appropriate holder.
Published holder dimension supplied in inch and metric values for each cataloged configuration.
Published C dimension supplied in inch and metric values for the selected holder.
Published D dimension supplied in inch and metric values for each #1107 part.
Find the Correct #1107 Holder
Search by #1107 part number, drive size, screw size, dimension or matching #1100 punch number.
| Part Number | Drive | Screw Size |
A inch / mm |
C inch / mm |
D inch / mm |
Matching #1100 Punch |
|---|---|---|---|---|---|---|
| 1107-10 | 10 | #5 | .307 / 7.80 | .179 / 4.55 | .687 / 17.44 | 1100-10-045 |
| 1107-15 | 15 | #6 | .307 / 7.80 | .242 / 6.15 | .687 / 17.44 | 1100-15-050 |
| 1107-20 | 20 | #8 | .307 / 7.80 | .242 / 6.15 | .687 / 17.44 | 1100-20-060 |
| 1107-25 | 25 | #10 | .372 / 9.45 | .302 / 7.67 | .687 / 17.44 | 1100-25-065 |
| 1107-27 | 27 | #12 | .371 / 9.45 | .302 / 7.67 | .687 / 17.44 | 1100-27-075 |
| 1107-30 | 30 | 1/4″ | .494 / 12.54 | .364 / 9.25 | 1.250 / 31.75 | 1100-30-090 |
| 1107-40 | 40 | 5/16″ | .619 / 15.72 | .487 / 12.34 | 1.250 / 31.75 | 1100-40-112 |
| 1107-45 | 45 | 3/8″ | .619 / 15.72 | .548 / 13.92 | 1.250 / 31.75 | 1100-45-140 |
M-2 High Speed Steel
The Series #1107 catalog specifies M-2 High Speed Steel and a published hardness of RC 62–64. Coatings are available upon request.
Series #1107 Material
The catalog specifies M-2 High Speed Steel for the #1107 Indented Hex Pin Holder family.
Match #1107 With the Correct #1100 Punch
The catalog makes the #1100 punch relationship part of the #1107 selection process. The table above provides the published punch number for every holder configuration.
Begin with the published drive size and corresponding screw size for the application.
Verify the three published holder dimensions for the required Series #1107 configuration.
Use the corresponding #1100 punch number printed in the configuration table when specifying the tooling system.
#1107 Indented Hex Pin Holder FAQs
What is the Universal Punch #1107?
Series #1107 is the Universal Punch 6-Lobe (TX) Indented Hex Pin Holder, catalog reference TMP-34.
How many #1107 configurations are listed?
The catalog publishes eight configurations covering drive sizes 10, 15, 20, 25, 27, 30, 40 and 45.
What screw sizes are covered?
The published configurations cover screw sizes #5, #6, #8, #10, #12, 1/4", 5/16" and 3/8".
What is the overall length?
The published overall length is 1.50 inches / 38.1 mm.
What material is specified?
The catalog specifies M-2 High Speed Steel.
What hardness is specified?
The published hardness is RC 62–64.
Are coatings available?
Yes. The catalog states that coatings are available upon request.
How do I select the correct #1100 punch?
Each #1107 configuration in the catalog identifies its corresponding #1100 6-Lobe punch number. Use the configuration table on this page to match the holder and punch.
Need a #1107 Indented Hex Pin Holder?
Send Universal Punch the required #1107 part number, drive size, screw size, quantity and corresponding #1100 punch requirement. Include any coating requirements or supporting print information with your RFQ.