Universal Punch Recess Tooling

#1100 6-Lobe (TX) Punch Pins

Precision punch pins engineered to form internal six-lobe recess geometry in cold-headed fasteners, with cataloged drive sizes from 5 through 100 and multiple M-reference options.

M-2 HSS • RC 62–64 M-42 HSS • RC 64–66 Coatings Available M Reference Required
Request a Quote Find a Standard Size
Universal Punch #1100 six-lobe punch pin Catalog reference TMP/TXP-20,21
Drive RangeSizes 5 through 100
Critical Selection FieldM reference must be specified
Material OptionsM-2 HSS or M-42 HSS
Catalog ReferenceTMP/TXP-20,21
Product Overview

The working punch that forms the internal six-lobe recess.

The #1100 series is used during cold heading to form the internal six-lobe drive geometry in the fastener head. It is the working punch component that creates the finished recess.

This product is different from the #2006 external punch knock-out pin, which supports part release within an external punch assembly. Select the #1100 by drive size and the required M reference dimension.

Search Catalog Sizes Send a Print or Sample
Studio view of a Universal Punch #1100 six-lobe punch pin
01

Forms the internal drive

Precision working geometry forms the six-lobe recess in the fastener head.

02

Broad catalog coverage

Standard drive sizes span 5 through 100, with multiple M-reference options.

03

Application-matched selection

Part number, drive size, and M reference work together to identify the correct tool.

Precision Geometry

Built around repeatable six-lobe recess formation.

The working end, body dimensions, material, heat treatment, and selected M reference must support the fastener geometry and production process as a complete tooling system.

01
Six-lobe working geometryAccurate punch geometry for controlled recess formation.
02
High-speed steel optionsM-2 and M-42 material choices listed in the catalog.
03
Production-specific reviewPrints, samples, material, and coating needs can be reviewed before quotation.
Precision six-lobe punch pin on an inspection fixture
Drawing & Standard Sizes

Complete digital catalog selection by drive size and M reference.

Search the catalog by part number, drive size, M reference, or any inch or millimeter value. Dimensions A, B, D, L, and W are shown for each drive-size family.

Catalog reference: TMP/TXP-20,21 Drive sizes: 5 through 100 Critical note: M reference must be specified
Interactive Size Finder

Find the correct part number before requesting a quotation.

Use any combination of the controls below. Every quote button goes directly to the Universal Punch quote page without an added query string.

Dimension view
132 catalog part numbers shown Shared drive-size dimensions are repeated digitally for easier review
#1100 part numbers, drive sizes, M references, and dimensions A, B, D, L, and W
Part Number Drive M Ref. A B D L W Actions
1100-05-250 5 .031/0.78 .059/1.49 .043/1.09 .073/1.85 .375/9.52 .062/1.57 Quote
1100-05-251 5 .017/0.43 .059/1.49 .043/1.09 .073/1.85 .375/9.52 .062/1.57 Quote
1100-05-252 5 .025/0.63 .059/1.49 .043/1.09 .073/1.85 .375/9.52 .062/1.57 Quote
1100-06-250 6 .041/1.04 .070/1.77 .050/1.29 .086/2.18 .375/9.52 .074/1.87 Quote
1100-06-251 6 .022/0.55 .070/1.77 .050/1.29 .086/2.18 .375/9.52 .074/1.87 Quote
1100-06-252 6 .030/0.76 .070/1.77 .050/1.29 .086/2.18 .375/9.52 .074/1.87 Quote
1100-06-253 6 .033/0.83 .070/1.77 .050/1.29 .086/2.18 .375/9.52 .074/1.87 Quote
1100-07-250 7 .033/0.83 .082/2.09 .059/1.52 .099/2.51 .375/9.52 .086/2.20 Quote
1100-07-251 7 .038/0.96 .082/2.09 .059/1.52 .099/2.51 .375/9.52 .086/2.20 Quote
1100-07-252 7 .043/1.09 .082/2.09 .059/1.52 .099/2.51 .375/9.52 .086/2.20 Quote
1100-07-253 7 .030/0.76 .082/2.09 .059/1.52 .099/2.51 .375/9.52 .086/2.20 Quote
1100-07-254 7 .025/0.63 .082/2.09 .059/1.52 .099/2.51 .375/9.52 .086/2.20 Quote
1100-07-255 7 .035/0.88 .082/2.09 .059/1.52 .099/2.51 .375/9.52 .086/2.20 Quote
1100-08-250 8 .033/0.83 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-08-251 8 .041/1.04 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-08-252 8 .051/1.29 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-08-253 8 .038/0.96 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-08-254 8 .030/0.76 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-08-255 8 .028/0.71 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-08-256 8 .043/1.09 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-08-257 8 .035/0.88 .095/2.41 .069/1.75 .111/2.81 .375/9.52 .099/2.51 Quote
1100-09-250 9 .040/1.01 .102/2.59 .074/1.87 .118/2.99 .375/9.52 .106/2.69 Quote
1100-09-251 9 .055/1.39 .102/2.59 .074/1.87 .118/2.99 .375/9.52 .106/2.69 Quote
1100-09-252 9 .046/1.16 .102/2.59 .074/1.87 .118/2.99 .375/9.52 .106/2.69 Quote
1100-09-253 9 .037/0.93 .102/2.59 .074/1.87 .118/2.99 .375/9.52 .106/2.69 Quote
1100-10-250 10 .050/1.27 .111/2.81 .081/2.05 .128/3.27 .629/15.97 .115/2.92 Quote
1100-10-251 10 .040/1.01 .111/2.81 .081/2.05 .128/3.27 .629/15.97 .115/2.92 Quote
1100-10-252 10 .060/1.52 .111/2.81 .081/2.05 .128/3.27 .629/15.97 .115/2.92 Quote
1100-10-253 10 .035/0.88 .111/2.81 .081/2.05 .128/3.27 .629/15.97 .115/2.92 Quote
1100-10-254 10 .045/1.14 .111/2.81 .081/2.05 .128/3.27 .629/15.97 .115/2.92 Quote
1100-10-255 10 .030/0.76 .111/2.81 .081/2.05 .128/3.27 .629/15.97 .115/2.92 Quote
1100-10-256 10 .033/0.83 .111/2.81 .081/2.05 .128/3.27 .629/15.97 .115/2.92 Quote
1100-15-250 15 .060/1.52 .132/3.35 .096/2.43 .149/3.78 .629/15.97 .136/3.45 Quote
1100-15-251 15 .045/1.14 .132/3.35 .096/2.43 .149/3.78 .629/15.97 .136/3.45 Quote
1100-15-252 15 .070/1.77 .132/3.35 .096/2.43 .149/3.78 .629/15.97 .136/3.45 Quote
1100-15-253 15 .035/0.88 .132/3.35 .096/2.43 .149/3.78 .629/15.97 .136/3.45 Quote
1100-15-254 15 .050/1.27 .132/3.35 .096/2.43 .149/3.78 .629/15.97 .136/3.45 Quote
1100-15-255 15 .033/0.83 .132/3.35 .096/2.43 .149/3.78 .629/15.97 .136/3.45 Quote
1100-15-256 15 .041/1.04 .132/3.35 .096/2.43 .149/3.78 .629/15.97 .136/3.45 Quote
1100-20-250 20 .089/2.26 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-251 20 .065/1.65 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-252 20 .080/2.03 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-253 20 .050/1.27 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-254 20 .038/0.96 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-255 20 .060/1.52 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-256 20 .056/1.42 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-257 20 .036/0.91 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-20-258 20 .045/1.14 .155/3.93 .112/2.84 .183/4.64 .629/15.97 .159/4.03 Quote
1100-25-250 25 .115/2.92 .178/4.52 .129/3.27 .204/5.18 .632/16.05 .182/4.62 Quote
1100-25-251 25 .065/1.65 .178/4.52 .129/3.27 .204/5.18 .632/16.05 .182/4.62 Quote
1100-25-252 25 .090/2.28 .178/4.52 .129/3.27 .204/5.18 .632/16.05 .182/4.62 Quote
1100-25-253 25 .055/1.39 .178/4.52 .129/3.27 .204/5.18 .632/16.05 .182/4.62 Quote
1100-25-254 25 .075/1.90 .178/4.52 .129/3.27 .204/5.18 .632/16.05 .182/4.62 Quote
1100-25-255 25 .044/1.11 .178/4.52 .129/3.27 .204/5.18 .632/16.05 .182/4.62 Quote
1100-25-256 25 .060/1.52 .178/4.52 .129/3.27 .204/5.18 .632/16.05 .182/4.62 Quote
1100-27-250 27 .120/3.04 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-27-251 27 .065/1.65 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-27-252 27 .105/2.66 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-27-253 27 .085/2.15 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-27-254 27 .075/1.90 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-27-255 27 .050/1.27 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-27-258 27 .060/1.52 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-27-259 27 .090/2.28 .200/5.08 .144/3.65 .225/5.71 .632/16.05 .208/5.28 Quote
1100-30-250 30 .125/3.17 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-251 30 .090/2.28 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-252 30 .105/2.66 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-253 30 .070/1.77 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-254 30 .055/1.39 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-255 30 .043/1.09 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-256 30 .080/2.03 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-257 30 .075/1.90 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-258 30 .060/1.52 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-30-260 30 .065/1.65 .221/5.61 .160/4.06 .254/6.45 .632/16.05 .225/5.71 Quote
1100-40-250 40 .135/3.42 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-251 40 .110/2.79 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-252 40 .125/3.17 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-253 40 .120/3.04 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-254 40 .097/2.46 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-255 40 .085/2.15 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-256 40 .070/1.77 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-257 40 .090/2.28 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-40-260 40 .080/2.03 .267/6.78 .192/4.87 .300/7.62 .760/19.30 .271/6.88 Quote
1100-45-250 45 .155/3.93 .313/7.95 .224/5.68 .374/9.49 1.010/25.65 .330/8.38 Quote
1100-45-251 45 .115/2.92 .313/7.95 .224/5.68 .374/9.49 1.010/25.65 .330/8.38 Quote
1100-45-252 45 .140/3.55 .313/7.95 .224/5.68 .374/9.49 1.010/25.65 .330/8.38 Quote
1100-45-253 45 .110/2.79 .313/7.95 .224/5.68 .374/9.49 1.010/25.65 .330/8.38 Quote
1100-45-254 45 .085/2.15 .313/7.95 .224/5.68 .374/9.49 1.010/25.65 .330/8.38 Quote
1100-45-256 45 .105/2.66 .313/7.95 .224/5.68 .374/9.49 1.010/25.65 .330/8.38 Quote
1100-50-250 50 .154/3.91 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-251 50 .135/3.42 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-252 50 .160/4.06 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-253 50 .095/2.41 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-255 50 .176/4.47 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-256 50 .129/3.27 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-257 50 .110/2.79 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-258 50 .143/3.63 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-50-259 50 .120/3.04 .353/8.96 .256/6.50 .417/10.59 1.010/25.65 .374/9.49 Quote
1100-55-250 55 .215/5.46 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-251 55 .110/2.79 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-252 55 .200/5.08 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-253 55 .145/3.68 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-254 55 .175/4.44 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-255 55 .095/2.41 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-256 55 .155/3.93 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-257 55 .135/3.42 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-258 55 .115/2.92 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-55-259 55 .190/4.82 .447/11.35 .318/8.07 .515/13.08 1.010/25.65 .469/11.91 Quote
1100-60-250 60 .280/7.11 .529/13.43 .381/9.67 .592/15.03 1.010/25.65 .562/14.27 Quote
1100-60-251 60 .145/3.68 .529/13.43 .381/9.67 .592/15.03 1.010/25.65 .562/14.27 Quote
1100-60-252 60 .245/6.22 .529/13.43 .381/9.67 .592/15.03 1.010/25.65 .562/14.27 Quote
1100-60-253 60 .215/5.46 .529/13.43 .381/9.67 .592/15.03 1.010/25.65 .562/14.27 Quote
1100-60-254 60 .185/4.69 .529/13.43 .381/9.67 .592/15.03 1.010/25.65 .562/14.27 Quote
1100-60-256 60 .150/3.81 .529/13.43 .381/9.67 .592/15.03 1.010/25.65 .562/14.27 Quote
1100-60-257 60 .221/5.61 .529/13.43 .381/9.67 .592/15.03 1.010/25.65 .562/14.27 Quote
1100-70-250 70 .320/8.12 .619/15.72 .443/11.25 .682/17.32 1.510/38.35 .652/16.56 Quote
1100-70-251 70 .240/6.09 .619/15.72 .443/11.25 .682/17.32 1.510/38.35 .652/16.56 Quote
1100-70-252 70 .280/7.11 .619/15.72 .443/11.25 .682/17.32 1.510/38.35 .652/16.56 Quote
1100-70-255 70 .174/4.41 .619/15.72 .443/11.25 .682/17.32 1.510/38.35 .652/16.56 Quote
1100-70-256 70 .261/6.62 .619/15.72 .443/11.25 .682/17.32 1.510/38.35 .652/16.56 Quote
1100-80-250 80 .370/9.39 .700/17.78 .508/12.90 .762/19.35 1.510/38.35 .733/18.61 Quote
1100-80-251 80 .315/8.00 .700/17.78 .508/12.90 .762/19.35 1.510/38.35 .733/18.61 Quote
1100-80-254 80 .202/5.13 .700/17.78 .508/12.90 .762/19.35 1.510/38.35 .733/18.61 Quote
1100-80-255 80 .300/7.62 .700/17.78 .508/12.90 .762/19.35 1.510/38.35 .733/18.61 Quote
1100-90-250 90 .380/9.65 .796/20.21 .569/14.45 .860/21.84 1.510/38.35 .829/21.05 Quote
1100-90-251 90 .300/7.62 .796/20.21 .569/14.45 .860/21.84 1.510/38.35 .829/21.05 Quote
1100-90-252 90 .360/9.14 .796/20.21 .569/14.45 .860/21.84 1.510/38.35 .829/21.05 Quote
1100-90-253 90 .240/6.09 .796/20.21 .569/14.45 .860/21.84 1.510/38.35 .829/21.05 Quote
1100-90-255 90 .221/5.61 .796/20.21 .569/14.45 .860/21.84 1.510/38.35 .829/21.05 Quote
1100-90-256 90 .347/8.81 .796/20.21 .569/14.45 .860/21.84 1.510/38.35 .829/21.05 Quote
1100-100-250 100 .400/10.16 .883/22.42 .632/16.05 .948/24.07 1.516/38.50 .916/23.26 Quote
1100-100-251 100 .450/11.43 .883/22.42 .632/16.05 .948/24.07 1.516/38.50 .916/23.26 Quote
1100-100-252 100 .510/12.95 .883/22.42 .632/16.05 .948/24.07 1.516/38.50 .916/23.26 Quote
1100-05-250
Drive size 5
M Ref..031 / 0.78
A.059 / 1.49
B.043 / 1.09
D.073 / 1.85
L.375 / 9.52
W.062 / 1.57
Request Quote
1100-05-251
Drive size 5
M Ref..017 / 0.43
A.059 / 1.49
B.043 / 1.09
D.073 / 1.85
L.375 / 9.52
W.062 / 1.57
Request Quote
1100-05-252
Drive size 5
M Ref..025 / 0.63
A.059 / 1.49
B.043 / 1.09
D.073 / 1.85
L.375 / 9.52
W.062 / 1.57
Request Quote
1100-06-250
Drive size 6
M Ref..041 / 1.04
A.070 / 1.77
B.050 / 1.29
D.086 / 2.18
L.375 / 9.52
W.074 / 1.87
Request Quote
1100-06-251
Drive size 6
M Ref..022 / 0.55
A.070 / 1.77
B.050 / 1.29
D.086 / 2.18
L.375 / 9.52
W.074 / 1.87
Request Quote
1100-06-252
Drive size 6
M Ref..030 / 0.76
A.070 / 1.77
B.050 / 1.29
D.086 / 2.18
L.375 / 9.52
W.074 / 1.87
Request Quote
1100-06-253
Drive size 6
M Ref..033 / 0.83
A.070 / 1.77
B.050 / 1.29
D.086 / 2.18
L.375 / 9.52
W.074 / 1.87
Request Quote
1100-07-250
Drive size 7
M Ref..033 / 0.83
A.082 / 2.09
B.059 / 1.52
D.099 / 2.51
L.375 / 9.52
W.086 / 2.20
Request Quote
1100-07-251
Drive size 7
M Ref..038 / 0.96
A.082 / 2.09
B.059 / 1.52
D.099 / 2.51
L.375 / 9.52
W.086 / 2.20
Request Quote
1100-07-252
Drive size 7
M Ref..043 / 1.09
A.082 / 2.09
B.059 / 1.52
D.099 / 2.51
L.375 / 9.52
W.086 / 2.20
Request Quote
1100-07-253
Drive size 7
M Ref..030 / 0.76
A.082 / 2.09
B.059 / 1.52
D.099 / 2.51
L.375 / 9.52
W.086 / 2.20
Request Quote
1100-07-254
Drive size 7
M Ref..025 / 0.63
A.082 / 2.09
B.059 / 1.52
D.099 / 2.51
L.375 / 9.52
W.086 / 2.20
Request Quote
1100-07-255
Drive size 7
M Ref..035 / 0.88
A.082 / 2.09
B.059 / 1.52
D.099 / 2.51
L.375 / 9.52
W.086 / 2.20
Request Quote
1100-08-250
Drive size 8
M Ref..033 / 0.83
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-08-251
Drive size 8
M Ref..041 / 1.04
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-08-252
Drive size 8
M Ref..051 / 1.29
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-08-253
Drive size 8
M Ref..038 / 0.96
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-08-254
Drive size 8
M Ref..030 / 0.76
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-08-255
Drive size 8
M Ref..028 / 0.71
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-08-256
Drive size 8
M Ref..043 / 1.09
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-08-257
Drive size 8
M Ref..035 / 0.88
A.095 / 2.41
B.069 / 1.75
D.111 / 2.81
L.375 / 9.52
W.099 / 2.51
Request Quote
1100-09-250
Drive size 9
M Ref..040 / 1.01
A.102 / 2.59
B.074 / 1.87
D.118 / 2.99
L.375 / 9.52
W.106 / 2.69
Request Quote
1100-09-251
Drive size 9
M Ref..055 / 1.39
A.102 / 2.59
B.074 / 1.87
D.118 / 2.99
L.375 / 9.52
W.106 / 2.69
Request Quote
1100-09-252
Drive size 9
M Ref..046 / 1.16
A.102 / 2.59
B.074 / 1.87
D.118 / 2.99
L.375 / 9.52
W.106 / 2.69
Request Quote
1100-09-253
Drive size 9
M Ref..037 / 0.93
A.102 / 2.59
B.074 / 1.87
D.118 / 2.99
L.375 / 9.52
W.106 / 2.69
Request Quote
1100-10-250
Drive size 10
M Ref..050 / 1.27
A.111 / 2.81
B.081 / 2.05
D.128 / 3.27
L.629 / 15.97
W.115 / 2.92
Request Quote
1100-10-251
Drive size 10
M Ref..040 / 1.01
A.111 / 2.81
B.081 / 2.05
D.128 / 3.27
L.629 / 15.97
W.115 / 2.92
Request Quote
1100-10-252
Drive size 10
M Ref..060 / 1.52
A.111 / 2.81
B.081 / 2.05
D.128 / 3.27
L.629 / 15.97
W.115 / 2.92
Request Quote
1100-10-253
Drive size 10
M Ref..035 / 0.88
A.111 / 2.81
B.081 / 2.05
D.128 / 3.27
L.629 / 15.97
W.115 / 2.92
Request Quote
1100-10-254
Drive size 10
M Ref..045 / 1.14
A.111 / 2.81
B.081 / 2.05
D.128 / 3.27
L.629 / 15.97
W.115 / 2.92
Request Quote
1100-10-255
Drive size 10
M Ref..030 / 0.76
A.111 / 2.81
B.081 / 2.05
D.128 / 3.27
L.629 / 15.97
W.115 / 2.92
Request Quote
1100-10-256
Drive size 10
M Ref..033 / 0.83
A.111 / 2.81
B.081 / 2.05
D.128 / 3.27
L.629 / 15.97
W.115 / 2.92
Request Quote
1100-15-250
Drive size 15
M Ref..060 / 1.52
A.132 / 3.35
B.096 / 2.43
D.149 / 3.78
L.629 / 15.97
W.136 / 3.45
Request Quote
1100-15-251
Drive size 15
M Ref..045 / 1.14
A.132 / 3.35
B.096 / 2.43
D.149 / 3.78
L.629 / 15.97
W.136 / 3.45
Request Quote
1100-15-252
Drive size 15
M Ref..070 / 1.77
A.132 / 3.35
B.096 / 2.43
D.149 / 3.78
L.629 / 15.97
W.136 / 3.45
Request Quote
1100-15-253
Drive size 15
M Ref..035 / 0.88
A.132 / 3.35
B.096 / 2.43
D.149 / 3.78
L.629 / 15.97
W.136 / 3.45
Request Quote
1100-15-254
Drive size 15
M Ref..050 / 1.27
A.132 / 3.35
B.096 / 2.43
D.149 / 3.78
L.629 / 15.97
W.136 / 3.45
Request Quote
1100-15-255
Drive size 15
M Ref..033 / 0.83
A.132 / 3.35
B.096 / 2.43
D.149 / 3.78
L.629 / 15.97
W.136 / 3.45
Request Quote
1100-15-256
Drive size 15
M Ref..041 / 1.04
A.132 / 3.35
B.096 / 2.43
D.149 / 3.78
L.629 / 15.97
W.136 / 3.45
Request Quote
1100-20-250
Drive size 20
M Ref..089 / 2.26
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-251
Drive size 20
M Ref..065 / 1.65
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-252
Drive size 20
M Ref..080 / 2.03
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-253
Drive size 20
M Ref..050 / 1.27
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-254
Drive size 20
M Ref..038 / 0.96
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-255
Drive size 20
M Ref..060 / 1.52
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-256
Drive size 20
M Ref..056 / 1.42
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-257
Drive size 20
M Ref..036 / 0.91
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-20-258
Drive size 20
M Ref..045 / 1.14
A.155 / 3.93
B.112 / 2.84
D.183 / 4.64
L.629 / 15.97
W.159 / 4.03
Request Quote
1100-25-250
Drive size 25
M Ref..115 / 2.92
A.178 / 4.52
B.129 / 3.27
D.204 / 5.18
L.632 / 16.05
W.182 / 4.62
Request Quote
1100-25-251
Drive size 25
M Ref..065 / 1.65
A.178 / 4.52
B.129 / 3.27
D.204 / 5.18
L.632 / 16.05
W.182 / 4.62
Request Quote
1100-25-252
Drive size 25
M Ref..090 / 2.28
A.178 / 4.52
B.129 / 3.27
D.204 / 5.18
L.632 / 16.05
W.182 / 4.62
Request Quote
1100-25-253
Drive size 25
M Ref..055 / 1.39
A.178 / 4.52
B.129 / 3.27
D.204 / 5.18
L.632 / 16.05
W.182 / 4.62
Request Quote
1100-25-254
Drive size 25
M Ref..075 / 1.90
A.178 / 4.52
B.129 / 3.27
D.204 / 5.18
L.632 / 16.05
W.182 / 4.62
Request Quote
1100-25-255
Drive size 25
M Ref..044 / 1.11
A.178 / 4.52
B.129 / 3.27
D.204 / 5.18
L.632 / 16.05
W.182 / 4.62
Request Quote
1100-25-256
Drive size 25
M Ref..060 / 1.52
A.178 / 4.52
B.129 / 3.27
D.204 / 5.18
L.632 / 16.05
W.182 / 4.62
Request Quote
1100-27-250
Drive size 27
M Ref..120 / 3.04
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-27-251
Drive size 27
M Ref..065 / 1.65
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-27-252
Drive size 27
M Ref..105 / 2.66
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-27-253
Drive size 27
M Ref..085 / 2.15
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-27-254
Drive size 27
M Ref..075 / 1.90
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-27-255
Drive size 27
M Ref..050 / 1.27
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-27-258
Drive size 27
M Ref..060 / 1.52
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-27-259
Drive size 27
M Ref..090 / 2.28
A.200 / 5.08
B.144 / 3.65
D.225 / 5.71
L.632 / 16.05
W.208 / 5.28
Request Quote
1100-30-250
Drive size 30
M Ref..125 / 3.17
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-251
Drive size 30
M Ref..090 / 2.28
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-252
Drive size 30
M Ref..105 / 2.66
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-253
Drive size 30
M Ref..070 / 1.77
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-254
Drive size 30
M Ref..055 / 1.39
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-255
Drive size 30
M Ref..043 / 1.09
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-256
Drive size 30
M Ref..080 / 2.03
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-257
Drive size 30
M Ref..075 / 1.90
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-258
Drive size 30
M Ref..060 / 1.52
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-30-260
Drive size 30
M Ref..065 / 1.65
A.221 / 5.61
B.160 / 4.06
D.254 / 6.45
L.632 / 16.05
W.225 / 5.71
Request Quote
1100-40-250
Drive size 40
M Ref..135 / 3.42
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-251
Drive size 40
M Ref..110 / 2.79
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-252
Drive size 40
M Ref..125 / 3.17
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-253
Drive size 40
M Ref..120 / 3.04
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-254
Drive size 40
M Ref..097 / 2.46
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-255
Drive size 40
M Ref..085 / 2.15
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-256
Drive size 40
M Ref..070 / 1.77
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-257
Drive size 40
M Ref..090 / 2.28
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-40-260
Drive size 40
M Ref..080 / 2.03
A.267 / 6.78
B.192 / 4.87
D.300 / 7.62
L.760 / 19.30
W.271 / 6.88
Request Quote
1100-45-250
Drive size 45
M Ref..155 / 3.93
A.313 / 7.95
B.224 / 5.68
D.374 / 9.49
L1.010 / 25.65
W.330 / 8.38
Request Quote
1100-45-251
Drive size 45
M Ref..115 / 2.92
A.313 / 7.95
B.224 / 5.68
D.374 / 9.49
L1.010 / 25.65
W.330 / 8.38
Request Quote
1100-45-252
Drive size 45
M Ref..140 / 3.55
A.313 / 7.95
B.224 / 5.68
D.374 / 9.49
L1.010 / 25.65
W.330 / 8.38
Request Quote
1100-45-253
Drive size 45
M Ref..110 / 2.79
A.313 / 7.95
B.224 / 5.68
D.374 / 9.49
L1.010 / 25.65
W.330 / 8.38
Request Quote
1100-45-254
Drive size 45
M Ref..085 / 2.15
A.313 / 7.95
B.224 / 5.68
D.374 / 9.49
L1.010 / 25.65
W.330 / 8.38
Request Quote
1100-45-256
Drive size 45
M Ref..105 / 2.66
A.313 / 7.95
B.224 / 5.68
D.374 / 9.49
L1.010 / 25.65
W.330 / 8.38
Request Quote
1100-50-250
Drive size 50
M Ref..154 / 3.91
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-251
Drive size 50
M Ref..135 / 3.42
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-252
Drive size 50
M Ref..160 / 4.06
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-253
Drive size 50
M Ref..095 / 2.41
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-255
Drive size 50
M Ref..176 / 4.47
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-256
Drive size 50
M Ref..129 / 3.27
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-257
Drive size 50
M Ref..110 / 2.79
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-258
Drive size 50
M Ref..143 / 3.63
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-50-259
Drive size 50
M Ref..120 / 3.04
A.353 / 8.96
B.256 / 6.50
D.417 / 10.59
L1.010 / 25.65
W.374 / 9.49
Request Quote
1100-55-250
Drive size 55
M Ref..215 / 5.46
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-251
Drive size 55
M Ref..110 / 2.79
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-252
Drive size 55
M Ref..200 / 5.08
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-253
Drive size 55
M Ref..145 / 3.68
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-254
Drive size 55
M Ref..175 / 4.44
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-255
Drive size 55
M Ref..095 / 2.41
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-256
Drive size 55
M Ref..155 / 3.93
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-257
Drive size 55
M Ref..135 / 3.42
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-258
Drive size 55
M Ref..115 / 2.92
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-55-259
Drive size 55
M Ref..190 / 4.82
A.447 / 11.35
B.318 / 8.07
D.515 / 13.08
L1.010 / 25.65
W.469 / 11.91
Request Quote
1100-60-250
Drive size 60
M Ref..280 / 7.11
A.529 / 13.43
B.381 / 9.67
D.592 / 15.03
L1.010 / 25.65
W.562 / 14.27
Request Quote
1100-60-251
Drive size 60
M Ref..145 / 3.68
A.529 / 13.43
B.381 / 9.67
D.592 / 15.03
L1.010 / 25.65
W.562 / 14.27
Request Quote
1100-60-252
Drive size 60
M Ref..245 / 6.22
A.529 / 13.43
B.381 / 9.67
D.592 / 15.03
L1.010 / 25.65
W.562 / 14.27
Request Quote
1100-60-253
Drive size 60
M Ref..215 / 5.46
A.529 / 13.43
B.381 / 9.67
D.592 / 15.03
L1.010 / 25.65
W.562 / 14.27
Request Quote
1100-60-254
Drive size 60
M Ref..185 / 4.69
A.529 / 13.43
B.381 / 9.67
D.592 / 15.03
L1.010 / 25.65
W.562 / 14.27
Request Quote
1100-60-256
Drive size 60
M Ref..150 / 3.81
A.529 / 13.43
B.381 / 9.67
D.592 / 15.03
L1.010 / 25.65
W.562 / 14.27
Request Quote
1100-60-257
Drive size 60
M Ref..221 / 5.61
A.529 / 13.43
B.381 / 9.67
D.592 / 15.03
L1.010 / 25.65
W.562 / 14.27
Request Quote
1100-70-250
Drive size 70
M Ref..320 / 8.12
A.619 / 15.72
B.443 / 11.25
D.682 / 17.32
L1.510 / 38.35
W.652 / 16.56
Request Quote
1100-70-251
Drive size 70
M Ref..240 / 6.09
A.619 / 15.72
B.443 / 11.25
D.682 / 17.32
L1.510 / 38.35
W.652 / 16.56
Request Quote
1100-70-252
Drive size 70
M Ref..280 / 7.11
A.619 / 15.72
B.443 / 11.25
D.682 / 17.32
L1.510 / 38.35
W.652 / 16.56
Request Quote
1100-70-255
Drive size 70
M Ref..174 / 4.41
A.619 / 15.72
B.443 / 11.25
D.682 / 17.32
L1.510 / 38.35
W.652 / 16.56
Request Quote
1100-70-256
Drive size 70
M Ref..261 / 6.62
A.619 / 15.72
B.443 / 11.25
D.682 / 17.32
L1.510 / 38.35
W.652 / 16.56
Request Quote
1100-80-250
Drive size 80
M Ref..370 / 9.39
A.700 / 17.78
B.508 / 12.90
D.762 / 19.35
L1.510 / 38.35
W.733 / 18.61
Request Quote
1100-80-251
Drive size 80
M Ref..315 / 8.00
A.700 / 17.78
B.508 / 12.90
D.762 / 19.35
L1.510 / 38.35
W.733 / 18.61
Request Quote
1100-80-254
Drive size 80
M Ref..202 / 5.13
A.700 / 17.78
B.508 / 12.90
D.762 / 19.35
L1.510 / 38.35
W.733 / 18.61
Request Quote
1100-80-255
Drive size 80
M Ref..300 / 7.62
A.700 / 17.78
B.508 / 12.90
D.762 / 19.35
L1.510 / 38.35
W.733 / 18.61
Request Quote
1100-90-250
Drive size 90
M Ref..380 / 9.65
A.796 / 20.21
B.569 / 14.45
D.860 / 21.84
L1.510 / 38.35
W.829 / 21.05
Request Quote
1100-90-251
Drive size 90
M Ref..300 / 7.62
A.796 / 20.21
B.569 / 14.45
D.860 / 21.84
L1.510 / 38.35
W.829 / 21.05
Request Quote
1100-90-252
Drive size 90
M Ref..360 / 9.14
A.796 / 20.21
B.569 / 14.45
D.860 / 21.84
L1.510 / 38.35
W.829 / 21.05
Request Quote
1100-90-253
Drive size 90
M Ref..240 / 6.09
A.796 / 20.21
B.569 / 14.45
D.860 / 21.84
L1.510 / 38.35
W.829 / 21.05
Request Quote
1100-90-255
Drive size 90
M Ref..221 / 5.61
A.796 / 20.21
B.569 / 14.45
D.860 / 21.84
L1.510 / 38.35
W.829 / 21.05
Request Quote
1100-90-256
Drive size 90
M Ref..347 / 8.81
A.796 / 20.21
B.569 / 14.45
D.860 / 21.84
L1.510 / 38.35
W.829 / 21.05
Request Quote
1100-100-250
Drive size 100
M Ref..400 / 10.16
A.883 / 22.42
B.632 / 16.05
D.948 / 24.07
L1.516 / 38.50
W.916 / 23.26
Request Quote
1100-100-251
Drive size 100
M Ref..450 / 11.43
A.883 / 22.42
B.632 / 16.05
D.948 / 24.07
L1.516 / 38.50
W.916 / 23.26
Request Quote
1100-100-252
Drive size 100
M Ref..510 / 12.95
A.883 / 22.42
B.632 / 16.05
D.948 / 24.07
L1.516 / 38.50
W.916 / 23.26
Request Quote
No catalog rows match the current search. Clear the search or select another drive size.
Close-up of the six-lobe working end on a Universal Punch #1100 punch pin
Materials & Coatings

High-speed steel options for demanding production tooling.

The catalog lists M-2 high-speed steel at RC 62–64 and M-42 high-speed steel at RC 64–66. Material selection should be reviewed against the production application, fastener material, cycle demands, and tooling objectives.

Coatings are available upon request. Provide the coating requirement or application details so Universal Punch can review the tooling before quotation.

Material Option 01M-2 HSS • RC 62–64
Material Option 02M-42 HSS • RC 64–66
Optional ProcessingCoatings available upon request
Selection RequirementSpecify the M reference
Request Material Review
#1100 six-lobe punch pin premium product presentation
Product series presentation
Multiple #1100 punch-pin sizes arranged with a technical drawing
Catalog size range
#1100 materials, features, and ordering overview
Technical overview
End-Use Applications

Internal six-lobe recess tooling for high-performance fastener production.

The #1100 series supports manufacturers producing internally driven six-lobe fasteners for demanding markets. Final tool selection depends on the fastener design, heading process, material, and production requirements.

01

Aerospace Fasteners

Precision recess formation for aerospace fastener programs requiring controlled geometry and repeatable tooling performance.

02

Automotive Production

Tooling for high-volume fastener manufacturing across powertrain, chassis, interior, and assembly applications.

03

Commercial Truck & Heavy Equipment

Internal-drive fasteners used in demanding vehicle and equipment assemblies.

04

Industrial Machinery

Production tooling for industrial fastening systems requiring dependable drive engagement.

05

Construction & Agriculture

Six-lobe fasteners for equipment, machinery, and structural assembly environments.

06

Specialty Fastener Programs

Application review for nonstandard requirements, samples, prints, material choices, and coating needs.

Ordering Guidance

The fastest path to an accurate #1100 quotation.

Select the required drive size, identify the corresponding M reference, and include the complete Universal Punch part number whenever possible.

Choose the drive sizeStart with the catalog drive size from 5 through 100.
Specify the M referenceEach drive size has one or more M-reference options tied to specific part numbers.
Include production requirementsProvide quantity, material preference, coating requirements, and any available print, sample, or mating-tool information.
Send the complete requestUse the Universal Punch quote page so engineering and sales can review the application.
Start Your Quote Request
#1100 technical product and ordering overview
Related Tooling

Build the complete six-lobe tooling program.

Related Series

#1000 6-Lobe Flat Head Punches

Related six-lobe punch tooling for flat-head applications.

View Product → Related Series

#2000 6-Lobe Flange Punch Inserts

Flange insert configurations for related external punch tooling.

View Product → Related Series

#2001 6-Lobe Stem Punch Inserts

Stem-style insert solutions for six-lobe punch assemblies.

View Product → Related Series

#2006 External Punch K.O. Pins

Knock-out pins that support part release in external punch assemblies.

View Product →
Frequently Asked Questions

What to know before selecting or quoting the #1100 series.

Catalog dimensions are reference information. Send the selected part number and application details for final review and quotation.

What does the #1100 punch pin form?
The #1100 punch pin forms the internal six-lobe recess in a fastener head during the cold-heading process.
Which drive sizes are cataloged?
The catalog lists drive sizes 5, 6, 7, 8, 9, 10, 15, 20, 25, 27, 30, 40, 45, 50, 55, 60, 70, 80, 90, and 100.
Why must the M reference be specified?
Each drive size has multiple catalog part numbers based on the required M reference dimension, so the M reference is essential for selecting and quoting the correct punch pin.
What materials are available?
The catalog lists M-2 high-speed steel at RC 62–64 and M-42 high-speed steel at RC 64–66.
Are coatings available?
Yes. Coatings are available upon request. Include the application and coating requirement with the quotation request.

Send the drive size, M reference, part number, and production requirements.

Universal Punch can review standard catalog selections, replacement tooling, prints, samples, material options, and coating requirements before preparing your quotation.

Request a QuoteReturn to Size Finder
#1100 6-Lobe Punch Pin Catalog Drawing
#1100 catalog drawing enlarged
Request a #1100 Quote
Universal Punch Corp.

Precision tooling, inspection gaging, and engineering support built for production.

Supporting fastener, aerospace, medical, and industrial manufacturers with Made in USA tooling and inspection solutions for over 50 years.

Call: (714) 556-4488 sales@universalpunch.com 4001 W. MacArthur Blvd., Santa Ana, CA 92704
Engineering Support

Have a print, part, or inspection challenge?

Send our team your drawing, part details, or application requirements and we’ll help determine the right tooling, gaging, or development path.

Request a Quote Contact Us
Quick Contact

Send us a message

=