#1285 Extra (TXP) Final Inspection GO Gage
Universal Punch Corp. | Precision Gaging
Precision final inspection GO gaging for internal Extra (TXP) recess head screws. Designed for finished product verification where post-process recess acceptance, dimensional consistency, and final quality confidence are critical before shipment or assembly.
Product Overview
The #1285 Extra (TXP) Final Inspection GO Gage is designed for finished product verification of internal Extra (TXP) recess head screws where final acceptance and dimensional consistency must be confirmed after manufacturing and finishing operations. This gage supports the last critical inspection step before parts move to shipment, assembly, or customer release.
In practical use, final inspection GO gaging helps verify that the recess remains acceptable after coating, plating, or other downstream processes that can influence usable form. It gives quality teams a repeatable way to confirm finished part readiness and maintain confidence in outgoing product.
Universal Punch designed the Extra (TXP) family to deliver improved driver fit, torque transfer, and driver life while reducing camout and slippage in demanding fastening applications.
What This Gage Checks
- Finished internal Extra (TXP) recess acceptance
- Post-process dimensional conformance
- Final inspection consistency before shipment
- Recess usability after manufacturing and finishing
- Quality verification for outgoing product
Technical Specifications
#1285
Final Inspection GO Gage
Extra (TXP)
Internal Extra (TXP) recess head screws
NIQ-811 & CIQ-811
5IP – 100IP
5-PLI-801 through 100-PLI-801
Inch or metric dial indicator
Digital indicators available on request
Heat treated, thermally stabilized, surface treated probes
Long-form calibration certificate, NIST traceable
Receiving and final inspection
Available Sizes and Ordering Information
Standard sizes are available from 5IP through 100IP. Use the table below to align part number, drive size, and reference number.
| Part Number | Drive Size | Reference Number |
|---|---|---|
| 1285-05 | 5IP | 5-PLI-801 |
| 1285-06 | 6IP | 6-PLI-801 |
| 1285-07 | 7IP | 7-PLI-801 |
| 1285-08 | 8IP | 8-PLI-801 |
| 1285-09 | 9IP | 9-PLI-801 |
| 1285-10 | 10IP | 10-PLI-801 |
| 1285-15 | 15IP | 15-PLI-801 |
| 1285-20 | 20IP | 20-PLI-801 |
| 1285-25 | 25IP | 25-PLI-801 |
| 1285-27 | 27IP | 27-PLI-801 |
| 1285-30 | 30IP | 30-PLI-801 |
| 1285-40 | 40IP | 40-PLI-801 |
| 1285-45 | 45IP | 45-PLI-801 |
| 1285-50 | 50IP | 50-PLI-801 |
| 1285-55 | 55IP | 55-PLI-801 |
| 1285-60 | 60IP | 60-PLI-801 |
| 1285-70 | 70IP | 70-PLI-801 |
| 1285-80 | 80IP | 80-PLI-801 |
| 1285-90 | 90IP | 90-PLI-801 |
| 1285-100 | 100IP | 100-PLI-801 |
Standards, Quality, and Traceability
Universal Punch manufactures gaging products for precision manufacturing environments where final inspection accuracy, repeatability, and outgoing quality confidence are critical. The #1285 Extra (TXP) Final Inspection GO Gage is referenced to NIQ-811 and CIQ-811 for internal Extra recess head screw inspection.
All gage probes are heat treated, thermally stabilized, and surface treated to provide additional wear resistance and dimensional stability. Long-form calibration certificates provide traceability to the N.I.S.T. National Institute of Standards and Technology, supporting controlled final inspection documentation and dependable long-term use.
Typical Applications
- Finished Extra (TXP) fastener inspection
- Outgoing quality verification before shipment
- Post-plating and post-process acceptance checks
- Aerospace, automotive, appliance, electronics, military, and medical programs
- High-performance fastening systems requiring enhanced fit and torque transfer
Options and Ordering Notes
- Specify inch or metric dial indicator when ordering
- SPC-compatible digital indicators available on request
- Long-form calibration certificates support traceable inspection documentation
- Contact Universal Punch for application guidance and quote support
Need help selecting the right Extra (TXP) inspection gage?
Send your fastener print, recess requirement, or inspection objective and the Universal Punch team can help match the correct Extra (TXP) gage configuration for your application.