#1282 Extra (TXP) No-Go Fallaway Gage
Universal Punch Corp. | Precision Gaging
Precision No-Go fallaway gaging for internal Extra (TXP) recess head screws. Designed for production and receiving inspection where maximum allowable recess form and fallaway depth must be controlled to maintain drive integrity, dimensional consistency, and high-performance fastening quality.
Product Overview
The #1282 Extra (TXP) No-Go Fallaway Gage is designed for production and receiving inspection of internal Extra (TXP) recess head screws where the upper limit of recess form size must be carefully controlled. This gage helps quality teams verify that the recess has not become oversized and that fallaway remains within the permitted inspection limit.
In practical use, No-Go fallaway gaging provides a repeatable method for checking whether the recess exceeds the maximum allowable condition. If the No-Go member enters the recess, that entry must remain within the specified fallaway depth. This makes the gage an important inspection tool for process control, incoming inspection, and dimensional verification before assembly.
Universal Punch designed the Extra (TXP) family to deliver improved driver bit life, superior fit between drive tool and fastener, higher torque transfer capability, reduced camout, and reduced slippage in demanding fastening applications.
What This Gage Checks
- Maximum allowable internal Extra (TXP) recess form size
- Fallaway depth during No-Go inspection
- Oversize recess conditions before assembly
- Receiving and in-process inspection consistency
- Drive quality and dimensional control across production lots
Technical Specifications
#1282
No-Go Fallaway Gage
Extra (TXP)
Internal Extra (TXP) recess head screws
NIQ-812 & CIQ-812
5IP – 100IP
5-PLI-805 through 100-PLI-805
Inch or metric dial indicator
Digital indicators available on request
Heat treated, thermally stabilized, surface treated probes
Long-form calibration certificate, NIST traceable
Production and receiving inspection
Available Sizes and Ordering Information
Standard sizes are available from 5IP through 100IP. Use the table below to align part number, drive size, and reference number.
| Part Number | Drive Size | Reference Number |
|---|---|---|
| 1282-05 | 5IP | 5-PLI-805 |
| 1282-06 | 6IP | 6-PLI-805 |
| 1282-07 | 7IP | 7-PLI-805 |
| 1282-08 | 8IP | 8-PLI-805 |
| 1282-09 | 9IP | 9-PLI-805 |
| 1282-10 | 10IP | 10-PLI-805 |
| 1282-15 | 15IP | 15-PLI-805 |
| 1282-20 | 20IP | 20-PLI-805 |
| 1282-25 | 25IP | 25-PLI-805 |
| 1282-27 | 27IP | 27-PLI-805 |
| 1282-30 | 30IP | 30-PLI-805 |
| 1282-40 | 40IP | 40-PLI-805 |
| 1282-45 | 45IP | 45-PLI-805 |
| 1282-50 | 50IP | 50-PLI-805 |
| 1282-55 | 55IP | 55-PLI-805 |
| 1282-60 | 60IP | 60-PLI-805 |
| 1282-70 | 70IP | 70-PLI-805 |
| 1282-80 | 80IP | 80-PLI-805 |
| 1282-90 | 90IP | 90-PLI-805 |
| 1282-100 | 100IP | 100-PLI-805 |
Standards, Quality, and Traceability
Universal Punch manufactures gaging products for precision manufacturing environments where dimensional accuracy, repeatability, and process control are critical. The #1282 Extra (TXP) No-Go Fallaway Gage is referenced to NIQ-812 and CIQ-812 for internal Extra recess head screw inspection.
All gage probes are heat treated, thermally stabilized, and surface treated to provide additional wear resistance and dimensional stability. Long-form calibration certificates provide traceability to the N.I.S.T. National Institute of Standards and Technology, supporting controlled inspection documentation and dependable long-term use.
Typical Applications
- Extra (TXP) fastener manufacturing quality control
- Receiving inspection of incoming parts
- Production line dimensional verification
- Aerospace, automotive, appliance, electronics, military, and medical programs
- High-performance fastening systems requiring enhanced fit and torque transfer
Options and Ordering Notes
- Specify inch or metric dial indicator when ordering
- SPC-compatible digital indicators available on request
- Supports Enhanced Hexalobular / 6-Lobe Extra inspection programs
- Contact Universal Punch for application guidance and quote support
Need help selecting the right Extra (TXP) inspection gage?
Send your fastener print, recess requirement, or inspection objective and the Universal Punch team can help match the correct Extra (TXP) gage configuration for your application.