Built for demanding fastener, aerospace, medical, and industrial manufacturing.
Compact steel-base configuration with catalog-identified ≤2 µm accuracy.
The Universal Punch LG-10 is a precision Lazer Gage for cylindrical parts from 1/8–1 in (3–25 mm) in diameter and part lengths up to 6 in (152 mm). Current Universal Punch selection documentation identifies the LG-10 specifically as a 3–25 mm Lazer Gage with a steel base and ≤2 µm accuracy.
The LG-10 is Universal Punch’s -10 Lazer Gage configuration for small-diameter cylindrical-part inspection. Unlike the K and KK families, which are differentiated primarily by indicator-carrier architecture, current Universal Punch selection literature identifies LG by its Lazer Gage architecture, steel base and ≤2 µm accuracy designation.
The model serves the familiar -10 diameter class while extending published part length to 6 in / 152 mm in a compact 3.5 lb / 1.6 kg configuration.
The Universal Punch LG-10 is a steel-base Lazer concentricity gage for 1/8–1 in (3–25 mm) diameter parts up to 6 in (152 mm) long. Universal Punch’s current selection documentation identifies the LG-10 as a ≤2 µm accuracy Lazer Gage configuration.
Current Universal Punch model-selection documentation describes the LG-10 simply and specifically as: Lazer Gage / 3–25 mm / Steel Base / ≤2 µm Accuracy.
The LG family is identified as its own steel-base gage configuration.
Published part diameter is 1/8–1 in / 3–25 mm.
The LG-10 itself is directly identified at ≤2 µm in current selection literature.
Universal Punch’s current model-selection documentation does not describe LG-10 as a generic -10 gage. It explicitly identifies the model as a 3–25 mm steel-base Lazer Gage with ≤2 µm accuracy.
Elsewhere in the Concentricity Gaging System, Universal Punch defines Standard Black at ≤4 µm and Precision Gold at ≤2 µm for applicable -10 and -20 models, with calibration directly traceable to NIST.
The LG-10 source material supports the part diameter, maximum part length, shipping weight, steel-base architecture and ≤2 µm accuracy identification below. Overall LG-10 gage length, width and height are intentionally not published here because those values were not supported by the source material reviewed for this page.
The LG-10 remains part of Universal Punch’s modular Concentricity Gaging System: select the gage model, select the support geometry, then configure the indicators and accessories around the part.
Universal Punch documents dedicated LG timing-belt sets and multiple -10 roller and top-contact geometries across the Concentricity Gaging System. Final LG-10 support compatibility should be confirmed against the actual component and current engineering configuration.
Important setup inputs include part diameter, overall length, usable support surfaces, feature being evaluated, measurement-contact location, tolerance, readout requirements, calibration requirements and manual versus powered rotation preference.
LG is the steel-base Lazer Gage family. LGM is the powered Lazer Gage family.
Steel-base Lazer Gage configuration for the -10 diameter class.
Motorized Lazer Gage configuration for applications requiring powered part rotation.
Current Universal Punch model-selection documentation identifies both LG sizes as steel-base Lazer Gages with ≤2 µm accuracy.
| Model | Part Diameter | Part Length | Architecture | Accuracy Identification | Published Shipping Weight |
|---|---|---|---|---|---|
| LG-10 | 1/8–1 in / 3–25 mm | Up to 6 in / 152 mm | Steel-base Lazer Gage | ≤2 µm | 3.5 lb / 1.6 kg |
| LG-20 | 3/8–2 in / 10–50 mm | Up to 6 in / 152 mm | Steel-base Lazer Gage | ≤2 µm | Not published here |
Send Universal Punch the part drawing, diameter, overall length, usable rotational support surfaces, feature being inspected, tolerance or allowable variation, measurement-contact or readout requirement, calibration requirements and whether manual LG or powered LGM operation is preferred. Our team can review the complete application before the gage is quoted.